|
Curriculum Vitae
I. Education
-
Ph. D., Stanford University (1979)
-
M. S., Stanford University (1974)
-
B. S. E., Princeton University (1973)
II. Honors & Awards:
-
Joseph M. Biedenbach Distinguished Service Award, 2003.
-
Listed in Who’s Who in America and Who’s Who in Engineering.
-
Samuel Litman Distinguished Professor of Engineering Award, 1994.
-
Mortar Board Excellence in Teaching Award, 1990.
-
Teacher of the Month, USC Chapter of the Society of Women Engineers,
April 1987.
-
Listed in Outstanding Young Men of America, 1985.
-
Best Teaching Assistant, Dept. of Chemical Engineering, Stanford
University, 1977‑78.
-
Graduation with "Highest Honors" in Chemical Engineering, Princeton
University, 1973.
-
Elected to membership in Tau Beta Pi, Phi Beta Kappa and Sigma Xi.
-
Achievement Award to the Outstanding Senior Undergraduate in Chemical
Engineering of Princeton University, The American Institute of
Chemists, New Jersey Chapter, 1973.
III. Memberships
-
Bye Fellow, Robinson College,
University of Cambridge, 2004
-
U. N. fellowship to attend training
program in Belgium, 1980
-
University Fellow, Stanford
University, 1973‑74
-
American Chemical Society
-
American Institute of Chemical
Engineers
-
American Society for Engineering
Education
-
The Society of
Rheology
-
Phi Beta Kappa
-
Sigma Xi
- Tau Beta Pi
IV. Publications
15. Venkata Giri
Kolli, Shem O. Ogadoh, Steve M. Abel, Francis Gadala-Maria, and
Thanasis D. Papathanasiou, “Particle Motion in the Fountain Flow
Region during Filling of a Tube with a Viscoelastic Fluid.” Polymer
Engineering & Science 42, 403-412 (2002).
14. Venkata Giri
Kolli, Emily J. Pollauf, and Francis Gadala-Maria, “Transient Normal
Force Response in a Concentrated Suspension of Spherical Particles,”
Journal of Rheology 46, 321-334 (2002).
13. Corina Mihut,
Dinyar K. Captain, Francis Gadala-Maria, and Michael D. Amiridis,
“Recycling of Nylon from Carpet Waste,” Polymer Engineering &
Science 41, 1457-1470 (2001).
12. Michael F. Petrou,
Baolin Wan, Francis Gadala-Maria, Venkata Giri Kolli, and Kent A.
Harries, “The Influence of Mortar Rheology on Aggregate Settlement,”
American Concrete Institute Materials Journal 97,
479-485 (2000).
11. Michael F. Petrou,
Kent A. Harries, Francis Gadala-Maria and Venkata Giri Kolli, “A
Unique Experimental Method for Monitoring Aggregate Settlement in
Concrete,” Cement and Concrete Research 30, 809-816
(2000).
10. Venkata Giri
Kolli, Francis Gadala-Maria, and Ruth Anderson, “Rheological
Characterization of Solder Pastes for Surface Mount Applications,”
IEEE Transactions on Components, Packaging, and Manufacturing
Technology - Part B 20, 1-8, (1997).
9. S. N. R.
Pakalapati, F. Gadala Maria, and R. E. White, "Dynamic Mechanical
Analysis of a Uniaxial Continuous Carbon Fiber-Thermoplastic Composite
Subjected to Anodic and Cathodic Currents" Polymer Composites
17, 620-626 (1996).
8. Ruth
Anderson, Francis Gadala-Maria, and Venkata Giri Kolli, "Solder Paste
Rheology and Fine Pitch Slump," Journal of Surface Mount Technology
8, 12-18 (1995).
7. Chandis R. Brasington
and F. Gadala-Maria, "Decrease in Fluorescence and Phosphorescence
Intensity of Nylon 66 Impurities by Exposure to Ultraviolet
Radiation," Journal of Applied Polymer Science 55,
687-697 (1995).
6. Chandis R.
Brasington and F. Gadala-Maria, "Classification of Nylon 66 Impurities
Using Digital Image Processing," Journal of Applied Polymer Science
53, 747-753 (1994).
5. F.
Gadala-Maria and F. Parsi, "Measurement of Fiber Orientation in
Short-Fiber Composites Using Digital Image Processing," Polymer
Composites 14, 126-131 (1993).
4. F. Parsi,
D. M. Husband, J. Lisk, F. Gadala-Maria, S. McNeill, and M. Sutton,
"Application of Digital Image Processing to the Analysis of Two-Phase
Materials With Spherical Inclusions," Polymer Composites 11,
158 163 (1990).
3. F. Parsi
and F. Gadala-Maria, "Fore-and-Aft Asymmetry in a Concentrated
Suspension of Solid Spheres," Journal of Rheology 31,
725 732 (1987).
2. D.
M. Husband and F. Gadala-Maria,
"Anisotropic Particle Distribution in Dilute Suspensions of Solid
Spheres," Journal of Rheology 31, 95 110 (1987).
1. F.
Gadala-Maria and A. Acrivos, "Shear-Induced Structure in a
Concentrated Suspension of Solid Spheres," Journal of Rheology
24, 799 814 (1980).
V. Refereed book chapters and proceedings volumes
7. S. O. Ogadhoh, V.
Kolli, F. Gadala-Maria & T. D. Papathanasiou, “On The Evolution
Of Microstructure During Injection Molding Of Particulate
Composites,” Mechanics of Nonlinear Materials, Banff, Canada, May
1998.
6. Michael
D. Amiridis and Francis A. Gadala-Maria, "Chemical Engineering at the
University of South Carolina," Chemical Engineering Education Vol. 30,
Number 1, pp. 2-7 (1996).
5. Ruth Anderson,
Francis Gadala-Maria, and Venkata Giri Kolli, "Solder Paste Rheology
and Fine Pitch Slump," The Technical Program. Surface Mount
International Conference & Exposition, San Jose, California, August 28
- September 1, 1994.
4. F. Parsi and F.
Gadala-Maria, "Flow- and Curing-Induced Fiber Orientation in
Short-Fiber Composites," AIChE Second Topical Conference on Emerging
Technologies in Materials, Extended Abstracts of Technical
Presentations, November 1989.
3. C. G. Kim and
F. Gadala-Maria, "The Rheology of Concentrated Suspensions: Effect of
Surface Forces and Particle Arrangement," AIChE Conference on Emerging
Technologies in Materials, Extended Abstracts of Technical
Presentations, August 1987.
2. D. M. Husband
and F. Gadala-Maria, "Anisotropy in Sheared Dilute Suspensions of
Solid Spheres," Advances in Rheology 2, 521‑528, (1984): Proc.
9th Intl. Cong. Rheology, Mexico.
1.
A. Acrivos, D. J. Jeffrey, F. Gadala-Maria and E. Herbolzheimer,
The Rheology of Concentrated Suspensions and Their Settling
Characteristics in Vessels Having Inclined Walls, E. P. R. I.
AF-1085 Final Report (RP 314‑1), May 1979.
VI. Invited talks and seminars
-
F. Gadala-Maria, “Total Cost
Assessment (TCA) Methodology: An Introduction.” Part of “Green
Chemical Technology for Sustainable Chemical Manufacturing,” a
Continuing Professional Environmental Education Seminar presented by
the School of the Environment, University of South Carolina. March
22, 2002.
-
F. Gadala-Maria, “Shear-Induced
Anisotropy in Suspensions of Spheres: Causes and Consequences.”
Invited seminar presented at Texas Tech University, October 19,
2001.
-
Francis A. Gadala-Maria (speaker),
“Shear-Induced Anisotropy in Suspensions of Spheres: Causes and
Consequences,” 3rd International Meeting of the Hellenic
Society of Rheology dedicated to Professor Andreas Acrivos on
occasion of his retirement, Patras, Greece, June 2001.
-
F. Gadala-Maria, "From Anisotropic
Suspensions to Anisotropic Composites." Seminar presented at the
Department of Chemical Engineering of City College of New York,
November 1990.
-
F. Gadala-Maria, "From Anisotropic
Suspensions to Anisotropic Composites: Enhancing Composite Materials
Through Process Modifications." Seminar presented at the Department
of Chemical Engineering at State University of New York at Buffalo,
September 1990.
-
C. G. Kim and F. Gadala-Maria, "The
Role of Interparticle Forces on the Transient Rheological Behavior
of Suspensions". 3rd Chemical Congress of North America & 195th
American Chemical Society National Meeting, Toronto, Canada, June
1988.
-
C. G. Kim and F. Gadala-Maria, "The
Rheology of Concentrated Suspensions: Effect of Surface Forces and
Particle Arrangement". Conference on Emerging Technologies in
Materials, Minneapolis, Minnesota, August 1987.
-
D. M. Husband, F. Parsi, and F. Gadala-Maria, "Particle Distribution
in Sheared Suspensions of Solid Spheres". Invited paper presented at
the 56th Annual Meeting of The Society of Rheology, Blacksburg,
Virginia, February 1985.
|