Edward P. Gatzke

Publications

Books and Book Chapters:

4.    Process Systems Engineering: Selected Topics and Supplemental Course Notes. E. P. Gatzke.  Lulu Press.  (2006) 163 pages. 

3.    Process Control Modules. F.J. Doyle III. with E. P. Gatzke and R. S. Parker. Prentice-Hall, New Jersey. (1999) 162 pages.

2.    C. E. Long and E. P. Gatzke.  "Hard Constraints for Prioritized Objective Nonlinear MPC." in Lecture Notes in Control and Information Sciences.  Springer, London, 2006.  Accepted December 2005.
     
1.    R. S. Parker, E. P. Gatzke, R. Mahadevan, E. S. Meadows, and F. J. Doyle III.  "Nonlinear Model Predictive Control: Issues and Applications" in Nonlinear Predictive Control, Theory and Practice.   The Institution of Electrical Engineers, London, (2001) pgs. 33-58.

Journal Publications:

23.     A. T. Stamps, S. Santhanagopalan, and E. P. Gatzke.  "Using Piecewise Polynomials to Model Open-Circuit Potential Data."  Journal of the Electrochemical Society.  2007, 154, P20-P27.

22.     J. A. Gantt and E. P. Gatzke.  "Analysis of the Multidimensional Behavior of Granulation." Materials Processing Technology.  2007, 183, 140-147.

21.     C. E. Long, P. K. Polisetty, and E. P. Gatzke.  "Deterministic Global Optimization for Nonlinear Model Predictive Control of Hybrid Dynamic Systems."  Submitted to Int. J. Robust and Nonlinear Control.  2007, 17, 1232-1250.

20.     J. A. Gantt, I. T. Cameron, J. D. Litster, and E. P. Gatzke.  "Determination of Coalescence Kernels for High Shear Granulation using DEM Simulations."  Powder Technology.  2006, 170 53-63.

19.     J. A. Gantt, K. K. Rochelle, and E. P. Gatzke.  "Type 1 Diabetic Patient Insulin Delivery Using Asymmetric PI Control."  Submitted to Chemical Engineering Communications.  2007, 194(5), 586-602.

18.     J. A. Gantt and E. P. Gatzke.  "Kinetic Theory of Granular Flow Limitations for Modeling High-Shear Mixing." Ind. Eng. And Chem. Res. 2006, 45, 6721-6727.

17.     J. A. Gantt and E. P. Gatzke.  "Stochastic Technique for Multidimensional Granulation Modeling." AIChE Journal. September, 2006, 52(9) 3067-3077.

16.    A. T. Stamps and E. P. Gatzke.  "Dynamic Modeling of a Methanol Reformer-PEMF Stack System for Analysis and Design"  Journal of Power Sources.  2006, 162 356-370.

15.     P. K. Polisetty, E. O. Voit, and E. P. Gatzke.  "Identification of Metabolic System Parameters Using Global Optimization Methods."  Theoretical Biology and Medical Modeling, January 2006, 3(4) 1-15.

14.     C. E. Long, P. K. Polisetty, and E. P. Gatzke.  "Nonlinear Model Predictive Control Using Deterministic Global Optimization."  Journal of Process Control, 2006, 16(6) 635-643.

13.     C. E. Long and E. P. Gatzke.  "Experimental Air-Pressure Tank Systems for Process Control Education." Chemical Engineering Education. January 2006. 40(1) 24-31.

12.     J. A. Gantt, E. P. Gatzke, V. Van Brunt, T. J. Deal, R. B. Haggard, M. Poirier, S. Fink, and C. Nash.  "Dynamic Modeling of a Pilot-Scale Crossflow Filtration Process."  Filtration, January, 2006.  6(1). 79-86.

11.     A. T. Stamps, C. E. Holland, R. E. White, and E. P. Gatzke.  "Analysis of Capacity Fade in a Lithium Ion Battery." Journal of Power Sources. October, 2005. 150(4) 229-239. 

10.     C. E. Long and E. P. Gatzke.  "Model Predictive Control Algorithm for Prioritized Objective Inferential Control of Unmeasured States Using Propositional Logic."  Industrial and Engineering Chemistry Research. April, 2005. 10(44) 3575-3584.

9.     J. A. Gantt and E. P. Gatzke.  "High-Shear Granulation Modeling Using a Discrete Element Simulation Approach."  Powder Technology. August, 2005. 156(2-3), 195-212.

8.     P. Kesavan, R. J. Allgor, E. P. Gatzke, and P. I. Barton.  "Outer Approximation Algorithms for Separable Nonconvex Mixed-Integer Nonlinear Programs." Mathematical Programming. May, 2004. 100, 517-535. 

7.       E. P. Gatzke, J. E. Tolsma, and P. I. Barton.  "Construction of Convex Relaxations Using Automated Code Generation Techniques." Optimization and Engineering. December, 2002. 3(3), 305-326.

6.    E. P. Gatzke and F. J. Doyle III.  "Use of multiple models and qualitative knowledge for on-line moving horizon disturbance estimation and fault diagnosis."  Journal of Process Control. February, 2002. 12(2), 339-352.

5.    E. P. Gatzke and F. J. Doyle III.  "Model Predictive Control of a Granulation System Using Soft Output Constraints and Prioritized Control Objectives."  Journal of Powder Technology. November, 2001. 121(2), 149-158.

4.    R. Vadigepalli, E. P. Gatzke, and F. J. Doyle III.  "Robust Control of a Multivaraiable Experimental Four-Tank System." Industrial and Engineering Chemistry Research. 2001. 40(8), 1916-1927.

3.    E. P. Gatzke, E. S. Meadows, C. Wang, and F. J. Doyle III. "Model Based Control of a Four Tank System." Computers and Chemical Engineering. July, 2000. 24(2), 1503-1509.

2.    E. P. Gatzke, R. Vadigepalli, E. S. Meadows, and F. J. Doyle III.  "Experiences with an Experimental Project in a Graduate Control Course." Chemical Engineering Education. 1999. 33(4), 270-275.

1.    F. J. Doyle III, E. P. Gatzke, and R. S. Parker. "Practical Case Studies for Undergraduate Process Dynamics and Control Using the Process Control Modules (PCM)."  Computer Applications in Engineering Education. 1998. 6(3), 181-191.

Refereed Conference Proceedings

10.  C. E. Long and E. P. Gatzke*.  "Optimal Application of Hard Constraints for Prioritized Objective Nonlinear Model Predictive Control."  International Workshop on the Assessment and Future Directions of Model Predictive Control,  Freudenstadt-Lauterbad, Germany. August, 2005.  Contributed.

9.    C. E. Long, J. A. Gantt, and E. P. Gatzke*.  "Identification and Control of a Continuous Granulation Circuit Exhibiting Hybrid Dynamics."  Chemical Process Control 7. Lake Louise, Canada, 2006.  Submitted August, 2005. Accepted September, 2005. Contributed.

8.    P. K. Polisetty, E. O. Voit*, and E. P. Gatzke*.  "Yield Optimization of Saccharomyces Cerevisiae Using a GMA Model and a MILP Based Piecewise Linear Relaxation Method."  FOSBE, Fundamentals of Systems Biology and Engineering, Santa Barbara, CA. Submitted November 2004, Accepted January, 2005. Contributed.

7.    C. E. Long, J. A. Gantt, and E. P. Gatzke*.  "Batch Granulation Control Using a Simplified Population Balance and Nonlinear Model Predictive Control."  American Control Conference, Portland, OR.  Submitted October 2004, Accepted January, 2005. Invited.

6.    C. E. Long and E. P. Gatzke*.  "Globally Optimal Nonlinear Model Predictive Control."  , DYCOPS 7, the 7th International Symposium on DYnamics and COntrol of Process Systems,  Boston,  June, 2004. Contributed.
 
5.    E. P. Gatzke* and E. O. Voit.  "Modeling of Metabolic Systems Using Global Optimization Methods." IFAC ADCHEM (Advanced Control of Chemical Processes) Conference, Hong Kong, January, 2004.  Invited. Poster.

4.    E. P. Gatzke and F. J. Doyle III*.  "Moving Horizon Control and Estimation of a Hybrid Process." Proceedings of the 6th International Federation for Automated Control Symposium on Dynamics and Control of Process Systems, Jejudo, Korea, June, 2001. Contributed.

3.    P. Dufour, S. Bhartiya, T. J. English, E. P. Gatzke, P. S. Dhurjati, and F. J. Doyle III*.  "Faults Detection of the Continuous Pulp Digester." Proceedings of the 6th International Federation for Automated Control Symposium on Dynamics and Control of Process Systems, Jejudo, Korea, June, 2001. Contributed.

2.    F. J. Doyle III*, K. Troutman, E. S. Meadows, E. P. Gatzke, R. Vadigepalli, K. Mahadevan, G. Whitmyre, G. Stoole, and P. Richards.  "Innovative Control Education Using a 4-Tank Experiment and the WWW." Association for Control Education, Sydney, Australia, July, 2000. Contributed.

1.    E. P. Gatzke* and F. J. Doyle III.  "Multiple Model Approach for CSTR Control." Proceedings of the International Federation for Automated Control World Congress, Beijing, July, 1999. Contributed.